top of page

The MA-200 is a large diaphragm, vacuum tube condenser microphone with a fixed cardioid pattern. Born to a lineage of fine microphone designs by David Royer, the MA-200 gives warm, full-bodied reproductions of vocals and instruments, with none of the shrillness and high frequency distortion artifacts that are often encountered with modern condenser microphones.

Utilizing hand-selected 3-micron capsules, high-quality Jensen audio transformers and military-grade JAN 5840 vacuum tubes, the MA-200 performs at a level reminiscent of some of the best loved classic condenser microphones. The MA-200 power supply can be set for 115V and 230V, 50 or 60 Hz, through an internal switch (100V is also available). Each MA-200 microphone, power supply and cable set is burned in for 24 hours, carefully tested and evaluated, then packaged in its protective case-within-a-case.

 

  • Hand-selected 3-micron capsule
  • Jensen audio transformer
  • Military grade JAN 5840 vacuum tube
  • Internal switchable power supply voltage
  • Ultra clean signal path

 

Recommended applications 

Use anywhere you would use an expensive, large diaphragm tube microphone.

  • Vocals
  • Voice Over and Broadcast
  • Acoustic Instruments
  • Piano
  • Drum Overheads, Drum Rooms
  • Orchestral Recording
  • Choral Recording

Mojave MA-200: Cardioid Tube Mic With Hand-selected 3-micron capsule

$1,199.00Price
  • TRANSDUCER TYPE: Externally excited capacitor type
  • DIAPHRAGM: 1-inch diameter, gold sputtered
  • DIAPHRAGM THICKNESS: 3-microns
  • POLAR RESPONSE: Cardioid
  • FREQUENCY RESPONSE: 20 Hz – 20 kHz, +/-3dB
  • SENSITIVITY: -37dB re 1V/pa
  • MAXIMUM SPL: 120dB
  • DISTORTION: head amp only, <1% @117dB SPL, <3% @ 125dB SPL
  • SELF NOISE: 14db nominal, not to exceed 16db (A Weighted)
  • IMPEDANCE: 200 ohms, balanced using an output transformer
  • VACUUM TUBE: 5840 – pentode tube wired for triode operation
  • POWER REQUIREMENTS: 100-120VAC; 220-240VAC, 50 or 60 Hz. Power consumption approx. 10 watts.
  • DIMENSIONS AND WEIGHT:
    Carrying case with microphone, power supply, shock mount
    and cables: 13 lbs.
    Microphone: 7 5/8″ X 2″, 1 lb.
bottom of page